Total Industrial Electrical Maintenance 13

Industrial electrical maintenance – Course Description:

This industrial electrical maintenance course is designed to enable candidates who have a small amount of electrical knowledge to gain recognised qualifications and skills to enable them to enter an industrial environment and work as a industrial electrician. The industrial electrical maintenance course will include a large amount of practical, enabling the candidate to install, fault find, design and wiring up control panels, using a variety of different methods.

Industrial electrical maintenance course Aims

The aim of the industrial electrical maintenance course is to provide solid foundations upon which the participant will be able to build and develop. Emphasis is given to providing the necessary skills, which will allow the participant to carry out routine electrical tasks. It is also made clear that a participant needs to identify and know their own limitations, allowing tasks to be carried out in a safe manner, not giving rise to danger.

Total Industrial Electrical Maintenance 13 training course

books

Essential Book supplied *throughout* course!

17th edition course

First exam fee included!

• Electricity at Work Regulations 1989, requirements and implementation • Working safely, including the importance of isolation procedures and lock out systems • Switches and Push Buttons, an explanation of the various types of switches and push buttons, the terminology and electrical symbols which are used in industry today, along with practical testing of functionality • Relays and Contractors, principles of operation, purpose and uses • Circuit design using BS electrical symbols and ladder diagrams, simple retaining circuits • Construction of the above circuit, demonstrating the techniques of cable termination.

• 3 phase induction motors, synchronous and asynchronous • Description of the component parts of a 3 phase induction motor • Demonstration of how a 3 phase rotating magnetic field is produced and how to reverse it • Explanation of synchronous and asynchronous speed and slip • Effect of the number of poles on motor speed • Frame sizes• Practical identification of various motors.

• Principles of 3 phase induction motor control systems • Overload protection principles of operation and use • Design and operation of a DOL (direct on line) starter • Construction of a DOL starter • Inspection and testing procedure for the above starter • Motor testing procedures.

• DOL starter modifications • Importance of updating documentation • Design, construction and verification of reversing starter control and power circuits.

• Star delta starters, principles of operation and uses • Design, construction and verification of star delta starter control and power circuits.

• Solenoids and actuators, principles of operation and maintenance

State precautions that may be necessary when removing cores from energised AC solenoids
Transformers, sizing, applications and uses
Heaters, applications, uses and safety precautions to be observed
Temperature controllers, various types, principles of operation and uses

• Thermal sensors, various types, principles of operation and uses.

Proximity devices, limit switches and proximity switches, various types, principles of operation and uses

Practical workshop, gaining an understanding of typical connections of various proximity devices and the range

of available supplies catered for, voltage levels and current type

• Development of a typical simple control system using push buttons, proximity devices, relays and indicator lamps.

• Protection against over current

Protective devices, various types, suitability and uses
Earthing, including principles of protection against indirect shock

• Undervoltage protection.

• Cable and core termination techniques, including crimping and soldering

Practical workshop terminating YY, SY, SWA and MICC cable
Testing, basic principles of circuit protective conductor testing and insulation resistance testing, instruments used and expected values

• Practical workshop testing cables terminated previously and testing cables with faults on test rig

• Fault finding, safety precautions and principles

Practical workshop on fault rigs
Root cause analysis
PPM and maximising uptime

Level 3 Certification

Level 3 National Certification is included with the first 10 days of the course, it enables the Candidate to identify the principles applied to, the processes involved and the components used in the construction of Electrical Panels for Engineering Applications and, the techniques used in inspection, testing and commissioning of electrical panels and associated equipment. You will gain knowledge and be assessed in the following areas.

  • Understand the relevant statutory and non-statutory legislation associated with design, construction and application of Electro Technical Panels;
  • Understand safe systems of working on Electro Technical Panels;
  • Understand how to interpret drawings, diagrams, specifications and manufacturers data to locate, position, install and connect wiring systems, components, wiring enclosures and equipment;
  • Understand how to select the appropriate tools and equipment to carry out the panel build;
  • Understand how to interpret drawings, diagrams, specifications and manufacturers’ data and to select appropriate working methods and procedures using tools, equipment and instruments to refurbish, maintain and repair electro technical panels;
  • Understand how to select appropriate working methods and use tools, equipment and instruments for the testing and commissioning of electro technical panels.

The Tutors:

Our Tutors are qualified, highly experienced, enthusiastic, knowledgeable and  extremely friendly, you can take full advantage of all the tips of the trade, personal experiences and practical advice they offer. This short theory course is intensive, but no compromise is made on the course content.  The atmosphere is relaxed and enjoyable which creates a good learning environment.

City & Guilds 2382-22 18th Edition Wiring Regulations

A course aimed at anyone involved in the design, construction and inspection and testing of electrical systems, also a nationally recognized ‘must have’ qualification for companies seeking to recruit electricians.
This course is intended to introduce the candidate to a working knowledge of the Wiring Regulations along with a brief overview of the Electricity at Work Regulations covering their statutory duties.

Course Overview

Receive the full course overview by submitting your details below

Course Reviews

Hi and thank you for knowledge I receive in this centre , possibly in some points was issue with my language barrier but tutors did the best so I can easy understand formulation and all information given to me and all this help me successfully pass 18th edition and wiring regs test . Thank you very much and I will strictly recommend this course to other people.
Vladislavs L 20/05/2022
I loved have studying in Technique Learning Solutions, and I pretend continue get others courses to fulfill my professional skills.
Dascar C 18/04/2022

BOOK YOUR COURSE BELOW

£1,815.00 + VAT (£2,178.00 inc VAT & all fees)

cngaccr

Now comes with our brand new, extra accreditation at no extra cost!

City & Guilds – Fundamental Electrical Principles for Industrial Practices
UK’s first City & Guilds total accreditation!

Course Duration:

13 Days
Please note the course dates may not run consecutively.
We will be in touch to confirm subsequent dates on this package course after registration.
Please get in touch if you would like to discuss the exact course dates for each module.

Pre-Requisites

  • Understanding of Basic Electrical Principles
  • Basic Electrical Knowledge

Prices

13 Day Course £1815.00 + VAT

What is Obtained/Achieved?

  • EAL Level 3 Award in Industrial and Panel Wiring
  • City & Guilds – Fundamental Electrical Principles for Industrial Practices
  • City & Guilds 2382-22 18th Edition Wiring Regulations

*PLEASE NOTE: No Discounts, gifts or otherwise are eligible to ELCAS delegates as this can be interpreted by ELCAS as an inducement*

  • 09
    Dec 2024
  • 17
    Feb 2025
  • 09
    Jun 2025
  • 29
    Sep 2025
Copyright © 2024 Technique Learning Solutions | All Rights Reserved | Website by ElevateOM - click here for a quote. | Sitemap