IET wiring regulations amendment 3 to BS 7671:2008 (IET Wiring Regulations 17th Edition) publishes in January 2015.

Potentially life-saving changes are proposed making this IET wiring regulations amendment 3 a vital update. These IET wiring regulations amendment 3 changes are expected to include (but are not limited to) amendments in the following areas:

• Changes to definitions throughout the Regulations
• Risk assessment approach for the omission of RCDs in non-domestic situations
• Consumer unit enclosures (to come into effect January 2016)
• Wiring in escape routes
• Changes to earth fault loop impedances for all  protective devices
• Updated EIC and EICR forms

    All expert IET guidance is being updated at the same time, offering you:

• On-Site Guide
• All eight IET Guidance Notes
• Electrician’s Guide to the Building Regulations
• Electrical Installation Design Guide
• Commentary on the IET Wiring Regulations
• All fully updated to Amendment No. 3.