Learn Technique LogoElm Logo
AM2 Assessment

AM2 Assessment

Technique Learning Solutions are now offering AM2 assessments at our approved training centre. The AM2 is the industry-standard end-point assessment for apprenticeships with qualifications such as C&G 2357 Level 3 or NVQ 3 (Diploma in Electrotechnical Technology). It is purely an assessment — there is no training element.

The AM2 is also increasingly used by those wishing to gain their JIB card as an electrician — whether holding older qualifications that predate the NVQ or qualified electricians from outside the UK looking to work in the industry.

It is today undeniably the industry-recognised trade test, designed to evidence that candidates have gained all relevant technical and safety-critical competencies during their training. It provides a single standard agreed upon by employers within the electrical industry, giving a reliable and trusted guarantee of safe, high-quality skills for the electrotechnical sector.

Recommended assessment and resit fees from 01 April 2026 are shown below. The fee you pay depends on the standard or version you are registered under — we confirm the correct price when you book. Ring us on 0800 112 3310 to book.

£885 - £1,340

AssessmentElectrician
cap icon

What is Obtained/Achieved?

AM2 Assessment Certificate

clock icon

Course Duration:

2½ – 3 days

AM2 runs over two and a half days. AM2S and AM2E each run over three days. The assessment is carried out in strict exam conditions. if you would like to discuss the exact course dates for each module.

  • AM2 section C1 is now Section C.

  • AM2 section C2 is now Section D.

  • AM2 section D is now Section E.

  • Recommended prices from 01 April 2026 depend on the specific standard or version you are registered under (including AM2, AM2S, AM2E, AM2D, AM2ED, and v1.0 vs v1.1 registration dates). We confirm the fee that applies to you when you book.

  • AM2 – Candidates undertaking the JIB mature candidate assessment and those following the Level 3 NVQ who are not an apprentice.

  • AM2S – Electrotechnical apprentices training against the apprenticeship standard.

  • AM2E – Experienced workers completing the experienced worker assessment. This can only be taken once you have gained the experienced worker qualification; proof is required before booking.

  • Apprentices coming to the end of their training for the JIB apprentice training scheme and the Installation of modern apprenticeships.

  • Achieve the AM2 certificate — the industry-recognised trade test for the electrotechnical sector.

  • Fulfil the end-point assessment requirement for Level 3 apprenticeships and the apprenticeship framework.

  • Meet the final step to gain a JIB Gold Card when combined with a Level 3 NVQ.

  • Demonstrate competence to employers with a trusted, nationally recognised qualification managed by NET.

  • Apprentices must pass their AM2 in their final year to complete their apprenticeship.

  • If you are not following the apprenticeship standard, an AM2 certificate and Level 3 NVQ are required to gain a JIB Gold Card.

  • Working electricians with older qualifications not currently recognised by the JIB for grading will need to pass the AM2.

  • The Electrotechnical Diploma now includes the AM2, so those registering for NVQ Level 3 in Electrical Installation or Maintenance will take it as part of that programme.

Recommended Price for Assessments

The fees for initial assessments depend on the specific standard or version the learner is registered under. Figures below are recommended fees from 01 April 2026.

ItemApplicable to / further informationFee from 01 April 2026
AM2Learners taking the Level 3 NVQ (City & Guilds 2357/EAL 1605)£885
AM2SApprentices registered up to 03 September 2023 on V1.0£965
AM2S v1Apprentices registered from 04 September 2023 on V1.1; reflects additional content of the revised standard£1,340
AM2EExperienced Worker Assessment registrations up to 03 September 2023£965
AM2E v1Experienced Worker Assessment registrations from 04 September 2023; includes 17-hour practical and 90-minute Knowledge Test£1,235
AM2DDomestic Electrician standard; includes 19-hour practical and 90-minute Knowledge Test£1,535
AM2EDDomestic Electrician Experienced Worker Assessment; includes 19-hour practical and 90-minute Knowledge Test£1,340

Ring us on 0800 112 3310 to book

Course duration

  • AM2 — two and a half days
  • AM2S — three days
  • AM2E — three days

Resit fees

Resit charges account for the additional resource required to schedule ad hoc activities rather than full assessments. If multiple sections are resat, the total charge must not exceed the maximum recommended price for a full assessment.

Sections A1, B, C, D, E

Section / assessmentAM2 / AM2E / AM2SAM2E v1 / AM2S v1
A1, C£190£235
B, D£265£315
E£190£280

Sections A2–A6

Resit sectionsAM2 / AM2E / AM2SAM2E v1 / AM2S v1
1 section (Lighting/Ring Final)£250£320
2 sections (SWA and Motor circuit)£385£475
3 sections (Central Heating)£455£555
4 sections (Bonding, Data, Safety circuit)£550£655
5 sections (Containment - AM2S/E only)£610£720

Resit fees for AM2D and AM2ED will be advised separately.

AM2E Supplementary Units

Initial sittings for these units include higher processing fees due to administration and certification costs.

ItemTotal fee (inc. NET fee)NET processing fee
AM2EU1 (Containment & Safe Isolation)£355£160
AM2EU2 (Testing & Safe Isolation)£355£160
Resit: Safe Isolation (EU1 or EU2)£195£140
Resit: EU1 Containment£250
Resit: EU2 Testing£270

Payment information

All payments should be made via BACS or Direct Debit.

Get Course Details

Course
Pre-Requisites:

Level 3 electrical qualification (C&G 2357, NVQ 3 or equivalent). AM2E candidates must hold the experienced worker qualification.

Upon completion of
AM2 Assessment participants receive:

AM2 Assessment Certificate — the industry-recognised end-point assessment for the electrotechnical sector.

Eligibility for JIB Gold Card (when combined with Level 3 NVQ).

Request a call back

Enter your details and we'll call you back about AM2 Assessment.

What Our Students Say About This Course

BB

Bill B

Feb 2026


"Fantastic course. Both tutors were brilliant, I couldn’t recommend this course enough."

WS

Willkiam S

Feb 2026


"Andy is great tutor, and very knowledgeable. The training centre is excellent, would recommend training to anyone wanting to progress"

DW

Dean W

Feb 2026


"Very good training, and the tutors are very supportive. Loved that there was a lot of practical work alongside the theory, made the whole experience balanced and enjoyed the hands on work, a benefit to my learning journey"

DF

David F

Feb 2026


"Would recommend this training course, for a beginner this covers from the basics to more advanced"

JN

Jackson N

Apr 2022


"I was impressed with the way the course was delivered. My tutor took time to explain all the salient points related to Electrical Engineering. Being my first time to attempt an electrical engineering course , I can confess that I have never been at easy with the way course was delivered. I really enjoyed the course. The tutors provided sufficient materials for the course, which made my life easier."

Got Questions? Get In Touch

Technique Learning Solutions

Technique Tower Business Park High Street Clay Cross Chesterfield Derbyshire S45 9EA

CALL
0800 112 3310
EMAIL
info@learntechnique.com